and hollow grinding!   Order will ship the next business day wheel is in stock ready to ship.

• Solid Rubber Contact Wheel For Belt Grinder
• Wheel OD : 12",   Width : 2"
• Ball Bearing ID :  1/2" , wheel is counter bored to a shoulder so bearings will not move
• Recommended running speed for this wheel should be around 800-3200 RPM’s
• Hardness 70A Duro. (this is the most widely used grinding wheels hardness used by the knife makers)
• Net weight 7.5 lb
• I use these on our AMK-77 Knife Grinder

For hollow grinding!   Order will ship the next business day wheel is in stock ready to ship.

• Serrated Rubber Contact Wheel For Belt Grinder
• Wheel OD : 10",   Width : 2"
• Ball Bearing ID :  1/2" 
• Recommended running speed for this wheel should be around 800-3600 RPM’s
• Hardness 70A Duro. (this is the most widely used grinding wheels hardness used by the knife makers)
• Net weight 7.5 lb
• I use these on our AMK-77 Knife Grinder

Knife Making 10" x 2" Rubber Solid Contact Wheel with 1/2 Bearings for Belt Sander  

and hollow grinding!   Order will ship the next business day wheel is in stock ready to ship.

• Solid Rubber Contact Wheel For Belt Grinder
• Wheel OD : 10",   Width : 2"
• Ball Bearing ID :  1/2", wheel has been counter bored so the bearings will not move
• Recommended running speed for this wheel should be around 800-3600 RPM’s
• Hardness 70A Duro. (this is the most widely used grinding wheels hardness used by the knife makers)
• Net weight 7.5 lb
• I use these on our AMK-77 Knife Grinder

This is a complete set of the wheels to build your own 2” x 48” or 2” x 72” belt knife grinder.

This listing includes:

One - 4” drive wheel with a bore sized for a 5/8" (.625”) drive shaft with a 3/16” keyway. It is also broached to use with keyed shaft or can be used with a smooth shaft with a flat ground on it for the set screw. A set screw is included. This wheel is domed (convex) in the contact area for proper belt tracking. It has a 4” OD x 2 1/4” wide.

One - 2 1/2” tracking wheel that is domed on a cnc lathe for proper tracking. The bearings have a ½” ID hole for use on ½” shafts or bolts for axles. They are 2 1/2” OD x 2 1/4” wide.

Two 2” contact wheels that are flat turned on the outside and also feature a ½” ID bearing. They are 2” OD x 2 1/4” wide.

All of the wheels are made of top grade aircraft aluminum. The bearings are pressed into pockets so they will not go deeper if over tightened. The bearings are replaceable. Wheels are ready to ship after payment is received.

Knife Making 8" x 2" Serrated Rubber Contact Wheel with 1/2 Bearings for Belt Sander  

and hollow grinding!   Order will ship the next business day wheel is in stock ready to ship.

• Serrated Rubber Contact Wheel For Belt Grinder
• Wheel OD : 8",   Width : 2"
• Ball Bearing ID :  1/2", Wheel is counter bored to a shoulder so bearings will not move
• Recommended running speed for this wheel should be around 800-3600 RPM’s
• Hardness 70A Duro. (this is the most widely used grinding wheels hardness used by the knife makers)
• Net weight 7.5 lb
• I use these on our AMK-77 Knife Grinder

and hollow grinding!   Order will ship the next business day wheel is in stock ready to ship.

• Soild Rubber Contact Wheel For Belt Grinder
• Wheel OD : 8",   Width : 2"
• Ball Bearing ID :  1/2", Wheel is counter bored to a shoulder so bearings will not move
• Recommended running speed for this wheel should be around 800-3600 RPM’s
• Hardness 70A Duro. (this is the most widely used grinding wheels hardness used by the knife makers)
• Net weight 7.5 lb
• I use these on our AMK-77 Knife Grinder

and hollow grinding!   Order will ship the next business day wheel is in stock ready to ship.

• Solid Rubber Contact Wheel For Belt Grinder
• Wheel OD : 6",   Width : 2"
• Ball Bearing ID :  1/2", Wheel is counter bored to a shoulder so bearings will not move
• Recommended running speed for this wheel should be around 800-3600 RPM’s
• Hardness 70A Duro. (this is the most widely used grinding wheels hardness used by the knife makers)
• Net weight 7.5 lb
• I use these on our AMK-77 Knife Grinde

and hollow grinding!  

• Serrated Rubber Contact Wheel For Belt Grinder
• Wheel OD : 4",   Width : 2"
• Ball Bearing ID :  1/2", Wheel is counter bored to a shoulder so bearings will not move
• Recommended running speed for this wheel should be around 800-3600 RPM’s
• Hardness 70A Duro. (this is the most widely used grinding wheels hardness used by the knife makers)
• Net weight 7.5 lb
• I use these on our AMK-77 Knife Grinder

and hollow grinding!  

• Solid Rubber Contact Wheel For Belt Grinder
• Wheel OD : 4",   Width : 2"
• Ball Bearing ID :  1/2", Wheel is counter bored to a shoulder so bearings will not move
• Recommended running speed for this wheel should be around 800-3600 RPM’s
• Hardness 70A Duro. (this is the most widely used grinding wheels hardness used by the knife makers)
• Net weight 7.5 lb
• I use these on our AMK-77 Knife Grinder