This Stainless Steel 'No-Tool' Stock Take-Down screw eliminates the need for a screw driver or allen driver to loose the stock screw. The 1" knurled knob will allow you to quickly clean your Ruger 10/22 or take it down for transporting in a smaller case.

PLEASE NOTE: This screw is made for stocks with standard depth holes. If you need a screw for a custom stock that sits deep into the stock please contact us.

This Blued Steel 'No-Tool' Stock Take-Down screw eliminates the need for a screw driver or allen driver to loose the stock screw. The 3/4" knurled knob will allow you to quickly clean your Ruger 10/22 or take it down for transporting in a smaller case. Knob is blued steel the screw is stainless.

PLEASE NOTE: This screw is made for stocks with standard depth holes. If you need a screw for a custom stock that sits deep into the stock please contact us.

Upgrade the fragile plastic front Kel-Tec Sub 2000 sight (First Generation Only) with our steel fiber optic system. You will receive one front sight blade, 3/32" wide, in your choice of RED or GREEN fiber installed and one spare fiber rod in case one breaks. Drop in installation. No cutting required.

Please email us with your choice within 24 hours or we will select the color.  This sight only fits the First Generation Kel-Tec Sub 2000.

We will stand behind each product we make with our 100% complete satisfaction guarantee. All of products are made in the Centerville, Ohio, U.S.A.

This Kel-Tec Sub 2000 Complete 24 Screw Upgrade Kit will replace the phillips head screws on your Kel-Tec Sub 2000 to a much more appealing Button Head Screw. You will receive 24 Button Head Screws to replace ALL of the current screws on your Sub 2000 PLUS 2 extra in case you lose one.

We will stand behind each product we make with our 100% complete satisfaction guarantee. All of products are made in the Centerville, Ohio, U.S.A.

This custom made Thompson Center Encore / Contender / G2 Cross Pin Removal Tool is made from durable Black Delrin Polymer. This tool makes it easy to remove the cross pin of your T/C Encore, Contender or G2 without marring the finish. Use the opposite end to tap in the pin to re-assembly.

We have sold hundreds of these Cross Pin Removal Tool, so don't be confused by cheap imitations. We will stand behind each product with your 100% complete satisfaction.

We personally manufacture these pin tools in Centerville, Ohio, U.S.A.

Pack of Three Custom Bolt Buffers for your RUGER 10/22. This solid white medium density Teflon® bolt buffer replaces the Ruger standard factory steel pin located at the rear of the receiver. Reduces bolt cycling noise during shooting when the bolt hits into the factory stop pin and reduces impact stress on the receiver. Easy installation, no special tools required. Drift-in from right side-to-left. For Ruger 10/22 LR - Not for Ruger 10/22 Magnum.

Specifications: Working temp range is -20 deg F to 500 degrees F. and has the lowest coefficient of expansion of any solid. It is famous for no slip-stick characteristics; static and dynamic coefficients are equal. Nothing sticks with any strength to its surface.

We will stand behind each product we make with our 100% complete satisfaction guarantee. This item are made in Ohio, U.S.A.